5-Layers Sintered Stainless Steel Mesh


filter 5-Layers sintered stainless steel mesh
  is our standard sintered mesh structure. A single layer of fine woven wire mesh is placed between two layers of coarser square woven meshes, which is then added to two layers of a strong Dutch woven wire mesh and sintered together to form a strong plate. The single layer of fine woven wire mesh acts as the filtration layer, and can be customized to meet a particular filtration rating, ranging from 5 micron to 300 microns. It can then be cut and fabricated into various discs, tubes, filter cartridges, and flat panels.
filter Material for sintered mesh
 

AISI304;AISI304L; AISI316;AISI316L >> check chemical component

Special Alloy Steel Hastelloy ,Monel ,Inconel & Titanium are acceptable base on customer's requirement

filter Dimension
 

Standard size: 500x1000mm 、600x1200mm and 1000x1000mm、1200x1200mm, and other dimensions in between are also available.

filter Technical Expression
 

 

Initial bubble-point pressure
A bubble the minimum pressure required to force the gas through the liquid impregnated porous material, Pa.

Average pore size
The average pore diameter determined by the bubble principle, in units of μm.

Relative permeability coefficient
Unit differential pressure, fluid volume flow through the filter elements per unit area in units of L/min.cm2.Pa

Viscous permeability coefficient

The unit of dynamic viscosity of the fluid when the fluid resistance is only formed by the viscous losses, the unit pressure gradient, volume flow through the filter elements per unit area in units of m2.

sintered mesh
filter Mesh construction
section of 5-layers sintered mesh
 

5-layers sintered stainless steel mesh

100+filter layer+100+12/64+64/12 @ 1.7mm thickness

6-layer sintered stainless steel mesh

100+filter layer+100+12/64+64/12+12 @ 3.5mm thickness

filter Performance of 5-layers sintered stainless steel mesh
 

Model

nominate size

(μm)

average pore size
(μm)

initial bubble-point pressure
(Pa)

relative permeability coefficient
(L/min.cm2.Pa)

viscous permeability coefficient
(m2)

tensile strength
(MPa)

SSW005

5

4~6

≥5450

≥1.1×10-4

≥8.0×10-13

≥100

SSW010

10

9~12

≥2700

≥5.2×10-4

≥4.8×10-12

≥100

SSW020

20

18~23

≥1360

≥1.5×10-3

≥1.5×10-11

≥100

SSW030

30

28~35

≥910

≥2.6×10-3

≥2.0×10-11

≥100

SSW050

50

48~55

≥540

≥5.6×10-3

≥5.2×10-11

≥110

SSW080

80

75~85

≥340

≥7.9×10-3

≥9.1×10-11

≥110

SSW100

100

93~108

≥270

≥9.2×10-3

≥1.1×10-10

≥110

SSW150

150

140~160

≥180

≥2.9×10-2

≥3.6×10-10

≥110

SSW200

200

187~213

≥140

≥5.0×10-2

≥5.8×10-10

≥110

 

filter Filter Elements
  We specialize in design and build for stainless steel cylindrical elements, disc elements and leaf elements. >>more
   
   
 
 

Copyright © 2011 HENGYI FILTER SINTERED FILTER DIVISION All Rights Reserved info@sintermesh.com