Multi-Layer Sintered Stainless Steel Mesh


filter Multi-Layer sintered stainless steel plain woven mesh
 

This type of Sintered Wire Mesh Laminate is made by sintering multiple layers of plain weaven square woven wire mesh together. Because of the large open area percentages of the square woven wire mesh layers,this type of sintered wire mesh laminate has good permeability and low resistance to flow.It can be desigan with any number and combination of square plain weaven wire mesh layers to achieve particular flow and filtration characteristics.This type sintered wire mesh is usedful for plolymer production,as well as variety of fluid and air filtration applications.

filter Material for sintered mesh
 

AISI304;AISI304L; AISI316;AISI316L & Titanium >> check chemical componion

filter Technical Expression
 

*High mechanical strength with the ability to maintain a steady filter rating under high pressure

*Easy to clean with a variety of filter cleaning techniques and reuse

*Heat and corrosion resistant

*Easy to fabricate,weld,punch,shear or otherwise from into various parts

*Wide ranges of filter rating

 
plain woven sintered mesh
filter Mesh Detail  
 

1.Filter Rating:1um-300um

2.Materials:SUS 304,316,316L

3.Size:500*1000mm,600*1200mm,1000*1000mm or other special sizes

4.Gross Weight:8kg/m2

   
 

 

   
   
   
   
 
 

Copyright © 2011 HENGYI FILTER SINTERED FILTER DIVISION All Rights Reserved info@sintermesh.com